crwdns2915892:0crwdne2915892:0
The earpiece speaker is used for all aspects involving sound from the phone
crwdns2942213:0crwdne2942213:0
-
-
Pull off back cover at bottom right corner.
-
-
-
Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.
-
-
-
With the plastic opening tool the spudger, gently pry off the inner back.
-
Be careful not to pry it off too hard, as it is just a plastic covering.
-
-
-
-
Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.
-
-
-
Using the spudger, gently pry up all ZIF connectors
-
ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable
-
Using same spudger, gently pry up the orange flat top connector
-
-
-
The earpiece speaker is located at the top-middle of the phone.
-
Using the plastic opening tool, carefully press into side of earpiece speaker and push up.
-
You will then be able to grab the speaker with your figers and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0