crwdns2915892:0crwdne2915892:0
Follow this guide to do a rear camera replacement on your ZTE Lever smart phone.
crwdns2942213:0crwdne2942213:0
-
-
Remove the SD card and the Sim card from the device.
-
-
-
Use an iFixit opening tool to separate the back from the device.
-
-
-
Remove the two 1.6mm Phillips #0 screws from the battery plug cover.
-
Remove the cover.
-
-
-
-
Disconnect the battery cable from the motherboard with a plastic opening tool.
-
-
-
Use your hands, or a plastic opening tool, to pry the battery from the phone.
-
-
-
Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.
-
-
-
Remove the top plastic motherboard cover using a plastic opening tool.
-
-
-
Using a plastic opening tool, disconnect the camera from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.