crwdns2915892:0crwdne2915892:0
This guide goes through how to safely disassemble the ZTE Blade Spark and replace the battery. This device contains electrical components, and the repair should be preformed in a dry environment. Replacing your battery is easy and a great way to give your device a fresh start.
crwdns2942213:0crwdne2942213:0
-
-
Apply heat evenly on the back cover using the iOpener to soften the adhesive.
-
-
-
Carefully remove the back cover using an opening tool.
-
-
-
Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.
-
Gently remove the SIM card tray.
-
-
-
To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.
-
-
-
-
Set the inner white panel to the side.
-
-
-
After removing the inner white panel you should see a black panel. Use a Phillips #00 screwdriver to remove the six 4.0 mm screws.
-
-
-
Remove the black panel, revealing the battery.
-
-
-
Disconnect the tab connecting the battery to the circuit.
-
-
-
Place battery off to the side and retrieve new battery.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.