crwdns2942213:0crwdne2942213:0
-
-
Remove the screws on the back. 1 of them is under the rubber pads in the center
-
Remove the back gently. Screen replacement stick can help. There are several plastic holding it.
-
-
-
Remove the connectors going to the screen. 2 wifi cables near the battery. One camera cable halfway to the carger. One screen cable on at the HDMI.
-
Remove the screws holding the hinges on the corners. 4 screws holding them.
-
-
-
-
Turn the hinges upwards till 90 degrees.
-
Remove the screen from the main board.
-
-
-
Remove 2 screws from the bottom.
-
pull the screen towards the place of the screws and it will come out.
-
-
-
Remove the screen. Remove the connector cable.
-
Check if the cable was wrong not the whole screen.
-
-
-
Do everything backwards.
-
Connect the cable.
-
Push the new screen away from the places of the screws.
-
Add the screws.
-
Put back the whole together. Turn the hinges back.
-
Add the screws to the holes marked with a triangle.
-
Reconnect the cables to the main board.
-
Put back the lid of the main board.
-
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
