crwdns2915892:0crwdne2915892:0
This guide provides step by step instructions to replace your controller's thumbstick successfully.
crwdns2942213:0crwdne2942213:0
-
-
Slide the battery pack cover toward the top of the controller to remove it.
-
Remove batteries.
-
-
-
Hold firmly the controller, place the spudger into the top seam of the controller and carefully work all the way to the bottom.
-
Pry the side of handle away from the controller by moving the spudger back and forth around the side handle's seam.
-
Repeat this process for both side handles.
-
-
-
-
Using the T8 Security Torxs screwdriver, remove the five 10mm screws from the back of the controller.
-
One of the screws is hidden behind the label.
-
-
-
Select the thumbstick that you want to replace and pull it off its pole.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:028crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Hello. I have an controller but it isn't working right. The right stick wont register when i push it down. I spilled cola on it. Any tips?