crwdns2915892:0crwdne2915892:0
Use this guide to remove the gray plastic lower vent from your Xbox 360.
crwdns2860944:0crwdne2860944:0
crwdns2860947:0crwdne2860947:0
-
-
Insert the flat end of a spudger or the edge of an Xbox 360 opening tool into the small gap at the front edge of the bottom vent.
-
Pry the front edge of the bottom vent away from the faceplate.
-
-
-
-
To release the clips, work from the front edge of the bottom vent.
-
While slightly lifting the front edge of the bottom vent, use the tip of a spudger to push the clips closest to the front of the bottom vent towards the inside of the console.
-
-
-
Repeat the same process to release the two center clips on the bottom vent.
-
-
-
Use the tip of your spudger to release the clips on the bottom vent nearest the back of the Xbox.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2869486:0crwdne2869486:0
crwdns2878426:063crwdne2878426:0
crwdns2917034:0crwdne2917034:0
cool thanks for the tip