crwdns2915892:0crwdne2915892:0
The motherboard controls all actions of the RC car including steering, acceleration, and communication with the remote. A faulty motherboard will lead to many glitches and unresponsive action in all involved systems.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the two 2.5mm Phillips #00 screws from the middle of the car.
-
Unclip the two clips to remove the battery cover.
-
-
-
Unplug the battery by pushing on the clip.
-
-
-
Unscrew the two 2.5mm Phillips #00 screws from each side
-
-
-
Remove the side skirt covers on each side of the car.
-
-
-
Lift up and remove the two side skirts.
-
-
-
-
Unscrew the two 2.5mm Phillips #00 screws from the front skirt of the car.
-
-
-
Lift the front part of the underbody and pull it out from the main underbody.
-
-
-
Unscrew the remaining seven 9mm Phillips #00 screws from the underbody of the car.
-
-
-
Lift the main underbody from the shell of the car.
-
Lift up the body to expose the wiring and hardware underneath.
-
-
-
Remove the reflective sticker from the top of the body.
-
-
-
Desolder all wires connected to the motherboard.
-
In this step, you will have to take great care in keeping track of the wires
-
Our suggestion is to attach tape to each wire, and letter the tape. Letter each tape according to the respective lettering found on the motherboard.
-
-
-
Unscrew the two 1.6mm Phillips #000 screws connecting the motherboard to the under body of the car.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2947412:02crwdne2947412:0
Hello I need to buy new circuit, can u guide me to any webstore? Thanx
Where can I by a replacement circuit board? PLease.