crwdns2915892:0crwdne2915892:0
The Wyze Cam V2's speaker is responsible for producing sound and is an important part of the system. If your cam's audio is muffled or completely absent, the speaker may need to be replaced. This guide will help walk you through the steps of replacing a non-functioning speaker.
crwdns2942213:0crwdne2942213:0
-
-
Open up the camera stand to expose the bottom plate of the camera.
-
Remove two 4 mm silver screws using the Phillips #0 screwdriver.
-
-
-
Using the iFixit opening tool, carefully pry open the bottom plate to gain access to the camera's internals.
-
-
-
-
Open up the back panel using the iFixit opening tool and unclip the panel from the rest of the device.
-
-
-
Using the angled slim tweezers, disconnect the cord and pull it gently off of the motherboard.
-
-
-
Remove the two 6 mm screws from the back cover with a Phillips #0 screwdriver.
-
Carefully lift off the speaker plate.
-
-
-
Carefully remove the speaker using the spudger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 4-10, Harold Fall 2023 crwdns2935289:0University of North Texas, Team 4-10, Harold Fall 2023crwdne2935289:0
UNT-HAROLD-F23S4G10
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
