crwdns2915892:0crwdne2915892:0
Glasses can be expensive after buying the prescription, the lenses, and the frames. When they break, so can your bank account. That's why our team has come up with an affordable and easy way to fix popped-out lenses on semi-rimless glasses using only a strip of a plastic bag. This six-step repair will have you and your bank thanking us.
crwdns2942213:0crwdne2942213:0
-
-
Place the missing lens against the upper rim of the glasses, feel free to fit the bottom wire underneath.
-
-
-
While holding the frame in position, thread the plastic strip around the metal wire. The strip should sit around halfway through it.
-
-
-
-
Using the plastic strip as an anchor, slowly re-fasten the wire underneath the bottom of the frame. Slide the strip from one end of the frame to the other.
-
The lens must remain firmly around the upper rim for the wire to slide underneath.
-
-
-
Once the wire is under the frame, use the plastic strip to gently adjust the wire as needed.
-
-
-
Once you are done, begin to remove the plastic strip from the frame.
-
Gently tug at one end of the strip to remove it from between the lens and the wire.
-
-
-
Ensure the lens is secured by gently pushing it.
-
If the lens is still loose or needs to be re-adjusted, take the lens out and start again from Step 1.
-
Following these steps will help save time and money so you can continue enjoying your shades.
Following these steps will help save time and money so you can continue enjoying your shades.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
York University, Team 2-3, Morris Winter 2024 crwdns2935289:0York University, Team 2-3, Morris Winter 2024crwdne2935289:0
YORK-MORRIS-W24S2G3
crwdns2931471:04crwdne2931471:0
crwdns2935303:01crwdne2935303:0
