crwdns2915892:0crwdne2915892:0
The hot plate is held in place by multiple screws along the burner ring and electrical wires. When free from the frame, take care when removing the iron plate itself as it is fairly dense.
crwdns2942213:0crwdne2942213:0
-
-
Remove the screws on the back panel with the #1 Phillips screwdriver bit.
-
The screws in the rubber legs of the burner do not need to be removed.
-
-
-
Using a wrench, remove the bolt from the center of the back panel.
-
-
-
-
The back panel can now be easily lifted off.
-
-
-
Remove screws #1 Phillips screwdriver bit.
-
3 screws on the perimeter of the circle
-
1 screw in the circle
-
2 screws on the eletrical stands with wires
-
-
-
Remove rod from the center of the plate with a wrench.
-
-
-
Remove plate carefully as to not damage internal components i.e. insulator, metal frame, wires, etc.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 10-7, Brown Fall 2014 crwdns2935289:0USF Tampa, Team 10-7, Brown Fall 2014crwdne2935289:0
USFT-BROWN-F14S10G7
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
