Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

If the blades to your Wahl Lithium Ion Trimmer are damaged or worn, this guide will show you how to replace them with functioning blades.

Blades can be damaged by being dropped, misused, or not being properly taken care of. In any of these circumstances, a replacement is typically required.

Because the blades are sharp, make sure to wear gloves or some sort of hand protection while handling the blades in order to avoid any sort of injury.

Before beginning this guide, make sure that the Wahl Lithium Ion Trimmer is powered off and disconnected from any source of electricity.

Parts

No parts specified.

  1. Examine the razor to identify any broken or jammed blades that require replacement. If any such blades are identified, the whole set must be changed.
    • Examine the razor to identify any broken or jammed blades that require replacement. If any such blades are identified, the whole set must be changed.

  2. Unscrew the two Phillips screws that hold the blades in place with a Phillips #0 screwdriver.
    • Unscrew the two Phillips screws that hold the blades in place with a Phillips #0 screwdriver.

  3. Apply pressure to the back side of the blades while pushing outward to remove the blade head completely from the Wahl Lithium Ion Trimmer. Apply pressure to the back side of the blades while pushing outward to remove the blade head completely from the Wahl Lithium Ion Trimmer.
    • Apply pressure to the back side of the blades while pushing outward to remove the blade head completely from the Wahl Lithium Ion Trimmer.

  4. Remove the metal clip using a Phillips #0 screwdriver. Remove the metal clip using a Phillips #0 screwdriver.
    • Remove the metal clip using a Phillips #0 screwdriver.

  5. Separate the Wahl Lithium Ion Trimmer head into its four components. Remove the damaged blade and replace it with a new one.
    • Separate the Wahl Lithium Ion Trimmer head into its four components. Remove the damaged blade and replace it with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

nathan

Member since: 10/22/2013

1,268 Reputation

6 Guides authored

3 Comments

Where can I get replacement arms?

Sam - Reply

Where can one obtain a new spring???

tinkrmann - Reply

The spring popped out of the head, but your pictures are too blurry to see how it goes back together.

Mark Wilson - Reply

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 26

Past 30 Days: 185

All Time: 10,978