crwdns2915892:0crwdne2915892:0
DTU-1031X is a fairly easy device to disassemble. The most challenging part of the disassembly process is detaching the bottom plastic cover secured with quite large plastic clips.
The display is not glued to the front glass.
All internal parts are held together with common phillips screws.
crwdns2942213:0crwdne2942213:0
-
-
Place the tablet with the screen facing down the surface.
-
(Optional) Remove the plastic dummy plug in the pen holder
-
-
-
Remove 4 rubber feet
-
Unscrew 4 Phillips #0screws
-
-
-
-
To remove the USB daughter board, unscrew 3 Philips #00 screws
-
Disconnect the cable and remove the board
-
-
-
To remove the mainboard, unscrew 4 Phillips #00 screws
-
Unplug the 40-pin LVDS flex cable
-
Unplug two cables connecting the digitizer daughter board to mainboard
-
Unplug the USB daughter board cable
-
-
-
To remove the digitizer daughter board, unscrew 4 Phillips #00 screws
-
Unclip two flex cables connecting the digitizer to the digitizer board
-
Disconnect two cables connecting the daugher board with the mainboard
-
-
-
Unplug the 40-pin LVDS cable from the LCD display
-
Unscrew 11 Phillips #00 screws holding the metal piece to the front plastic casing
-
-
-
Unscrew 9 wide Phillips #00 screws holding the LCD panel to the front plastic casing
-
The LCD display will now be loose, and can be removed
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
