crwdns2915892:0crwdne2915892:0
This guide will show you how to remove your device's motherboard.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 3mm Phillips #00 screws on the bottom of the tablet.
-
-
-
With the plastic opening tools, pry open the back cover.
-
-
-
Remove the back cover from the tablet.
-
-
-
Peel off the black pieces of tape from the internal components.
-
-
-
Carefully remove the battery from the tablet.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
With the tweezers, firmly grab the wire at the base and pull to disconnect the battery from the motherboard.
-
-
-
-
Carefully remove the speaker from the metal plate with your hands.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
With tweezers, firmly grab the wire at the base and pull to disconnect the speaker from the motherboard.
-
-
-
Peel off black tape that is holding the camera in place.
-
-
-
Carefully disconnect the ribbon cables from the motherboard.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using the tweezers, firmly grab wires and pull to disconnect them from the motherboard.
-
-
-
Disconnect the large golden ribbon cable that is connected to the digitizer. Firmly grab the cable close to the connection and pull to disconnect.
-
-
-
Remove four 4mm PH00 silver screws from the motherboard.
-
-
-
Remove two 2mm PH00 black screws from the motherboard.
-
-
-
Carefully remove the silver cover from the motherboard.
-
-
-
Gently pick up and turn over the motherboard. While turned over, disconnect the last ribbon cable that connects to screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.