crwdns2915892:0crwdne2915892:0
Follow this repair guide to find out how to replace the speaker with a functional one.
crwdns2942213:0crwdne2942213:0
-
-
Unplug the battery from its connector and remove.
-
-
-
Using the Phillips #00 screwdriver, unscrew the two 5.0 mm Phillips #00 screws at the bottom of the monitor.
-
-
-
-
Separate the back half of the device from the front using the metal spudger.
-
-
-
Remove the two 5.0 mm Phillips #00 screws at the top of the device which holds the antenna at the top of the motherboard.
-
This will allow the removal of the silver handle.
-
-
-
Remove the “TALK” button to get access to remove the motherboard.
-
-
-
Push down on the antenna, located on the top of the motherboard.
-
-
-
Gently remove the motherboard away from the monitor.
-
-
-
Use the plastic spudger to push the two white plastic tabs, at the bottom of the device, up to release the metal retaining clip.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.