crwdns2915892:0crwdne2915892:0
This guide will show you how to carefully disassemble the Unnecto Drone M with easily available tools.
crwdns2942213:0crwdne2942213:0
-
-
Place the phone facedown on a cleared work area
-
Remove the back case by applying moderate force to the indentation in the lower left corner of the case.
-
-
-
Grip the top right corner of the battery.
-
Remove the battery by pulling it outwards.
-
-
-
Remove the four screws on the back of the phone using a Philips 000 screwdriver
-
-
-
-
Separate the frame evenly using a plastic opening tool.
-
-
-
Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.
-
-
-
Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.
-
-
-
Set aside the circuit board from the screen protector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.