crwdns2915892:0crwdne2915892:0
A small amount of disassembly is required to replace the camera. The beginner can complete this task with just a couple tools.
crwdns2942213:0crwdne2942213:0
-
-
Press the on/off button on the top to power the phone off.
-
-
-
Remove the battery cover by pressing and sliding the cover down and off of the phone.
-
-
-
Pull the battery removal tab and lift the battery out of the phone.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the two 4.0-mm #000 Phillips screws at the top of the battery compartment. Tweezers may be useful to remove the screws.
-
-
-
Use firm pressure to carefully pry off the cover with your fingers.
-
-
-
Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.
-
-
-
Gently pry off the camera flash circuit board with the spudger.
-
-
-
Gently pry off the camera with the spudger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.