crwdns2915892:0crwdne2915892:0
This guide will demonstrate removing the motherboard from your Turtle Beach Recon.
The motherboard connects all of the components within your Turtle Beach Recon by distributing electricity. Ensure that your Turtle Beach Recon is unplugged and separated from your power source.
Removing the motherboard is often necessary if your Turtle Beach Recon is not responding, has been exposed to water, or has distorted audio.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #00 screwdriver to remove seven 10 mm screws from the back plate.
-
-
-
Use an opening tool to separate the back plate from the grips of your Turtle Beach Recon.
-
Use your fingers to remove the back plate from the body of your Turtle Beach Recon.
-
-
-
Remove the four 10 mm screws from the motherboard using a Phillips #00 screwdriver.
-
-
-
-
Use your fingers to grab the motherboard.
-
Gently pull the motherboard and joystick caps away from the face plate.
-
-
-
Use a Phillips #00 screwdriver to remove six 10 mm screws from the motherboard.
-
-
-
Use your fingers to lift both of the joystick caps off of the motherboard.
-
Remove the joystick caps.
-
-
-
Nothing can be further removed from the motherboard. It can now be replaced.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 6-1, Botvin Spring 2024 crwdns2935289:0UMass Dartmouth, Team 6-1, Botvin Spring 2024crwdne2935289:0
UMASSD-BOTVIN-S24S6G1
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
