crwdns2915892:0crwdne2915892:0
This guide outlines the steps needed to replace the impeller spindle. The spindle is the shaft that the impeller spins around.
-
-
Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.
-
-
-
Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.
-
-
-
-
Remove the rubber stop that is attached to the tube that runs through the middle of the impeller. Also remove the bearing that is between the stop and the impeller.
-
-
-
Hold the impeller cover with one hand and the impeller with the other. Slide the impeller out.
-
-
-
Hold the impeller spindle and wiggle it side to side until it detaches from the impeller cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 3-6, Hickman Winter 2015 crwdns2935289:0USF Tampa, Team 3-6, Hickman Winter 2015crwdne2935289:0
USFT-HICKMAN-W15S3G6
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
crwdns2917034:0crwdne2917034:0
The part number of the spindle itself would probably be a good idea to included in this guide.
