crwdns2915892:0crwdne2915892:0
If a fan stops working all together on this device, then replacing it can be a good way to save money over buying a new projector. This guide will show how to get to and replace this part.
crwdns2942213:0crwdne2942213:0
-
-
Start by removing the two screws on the bottom of the device as shown.
-
-
-
Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.
-
Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.
-
-
-
Remove the screws from the case located around the device.
-
-
-
Remove the plastic panels from the body.
-
-
-
-
Remove the screws from the IO panel.
-
Pull up on the panel and remove it.
-
-
-
Unscrew the screws from the metal shielding to remove it.
-
-
-
Remove cables from motherboard.
-
Unscrew motherboard and remove from device.
-
-
-
Remove the cable from the bottom of the motherboard to fully remove it.
-
-
-
Unscrew the power adapter on the back.
-
-
-
Remove cables from the power supply board.
-
Remove the screws located around the board to un-mount it.
-
-
-
Remove the power board to reveal the bottom two screws to the fan.
-
Unscrew the fan and replace it with an equivalent one.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of Memphis, Team S1-G3, Kim Spring 2018 crwdns2935289:0University of Memphis, Team S1-G3, Kim Spring 2018crwdne2935289:0
UM-KIM-S18S1G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
