crwdns2942213:0crwdne2942213:0
-
-
Locate the battery locks on the bottom of the laptop.
-
Slide the right lock outwards, until it locks into place.
-
Slide and hold the left lock outwards and hold it in place.
-
-
-
While holding the lock in place, slide the battery out towards you.
-
-
-
Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.
-
-
-
Use a plastic opening tool to pry off the plastic panel above the keyboard.
-
-
-
-
Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.
-
-
-
Slowly lift the keyboard out, up and towards the screen.
-
-
-
Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.
-
-
-
Remove stickers from four corners of laptop.
-
Remove screws underneath stickers.
-
-
-
Use plastic opening tool to pry the hinges off.
-
Remove the screen cover.
-
Unscrew the six screws on the bottom of the screen near the top of the hinges.
-
-
-
Remove cable located next to the fan.
-
Fold down screen without screen back cover to remove cable as shown.
-
-
-
Unscrew both screws on each side of the screen.
-
Remove the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Que éxito esta pagina , muy gran trabajo, soy de Perú y creo que este tipo de trabajos son muy bien valorados, saludos a la distancia.