crwdns2915892:0crwdne2915892:0
In order to take the motherboard cover off the keyboard needs to be removed.
crwdns2942213:0crwdne2942213:0
-
-
Locate the two sliding battery locks on the underside of the laptop.
-
-
-
Locate the right battery lock and slide it to the right.
-
-
-
While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.
-
-
-
-
Locate the plastic strip at the top of the keyboard.
-
Use a pry tool to remove the plastic strip.
-
Using your hands pull out the rest of the plastic strip.
-
-
-
Use a phillips head #0 screwdriver to remove the two 3.75mm screws holding the keyboard in place.
-
-
-
Lift up the top of the keyboard to remove it.
-
Unlock the ribbon cable by pushing on the locks that are located on both sides of ribbon cable.
-
Unplug the ribbon cable from the laptop.
-
-
-
Remove the keyboard completely from the laptop.
-
-
-
Remove all 6.75mm screws from the bottom of the laptop. The 3 screws under the battery are 3.75mm.
-
Remove all 5.25mm screws from the top of the laptop.
-
-
-
Unplug the wires highlighted with red squares.
-
Using a pry tool and yours hands to remove the motherboard cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Clemson, Team 1-2, Benson Spring 2014 crwdns2935289:0Clemson, Team 1-2, Benson Spring 2014crwdne2935289:0
CLEM-BENSON-S14S1G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:010crwdne2935297:0
