crwdns2942213:0crwdne2942213:0
-
-
Push the left tab with your left hand.
-
Then push the right tab with your right hand.
-
While your right hand is still pushing, remove the battery with your left hand.
-
-
-
Remove this screw with a JIS #000 screwdriver.
-
-
-
-
Remove the panel with the plastic opening tool. Make sure you lift it on all four sides.
-
-
-
Using the JIS #000 screwdriver, remove the .5mm screw.
-
-
-
Use the plastic opening tool to remove the keyboard from the laptop.
-
-
-
Once keyboard is popped out, use a nylon spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Sam Houston State, Team S16-G1, Nardone Spring 2018 crwdns2935289:0Sam Houston State, Team S16-G1, Nardone Spring 2018crwdne2935289:0
SHSU-NARDONE-S18S16G1
crwdns2931471:05crwdne2931471:0
crwdns2935297:015crwdne2935297:0
crwdns2947412:02crwdne2947412:0
Step has the incorrect screw to release the keyboard. There is no need to open the back panel. The screw which holds down the keyboard is the long screw between the Serial Number sticker and the battery release switch #2.
Agreed 100%. Good thing I looked at this comment before I ran into major trouble. Thank you!
