crwdns2915892:0crwdne2915892:0
When the screen is cracked or just does not work, it will need to be replaced. This is the guide you need to help you do that.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 6.5mm PH1 Phillips screws securing the battery.
-
-
-
Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.
-
-
-
Unscrew the ten 6.5mm PH1 Phillips head screws that hold down the back cover.
-
-
-
Using the plastic opening tools, open the back cover and remove it from the laptop.
-
-
-
-
Carefully disconnect these three cables.
-
-
-
Open the laptop at a right angle to make the later removal much easier.
-
-
-
Unscrew the four PH1 Phillips head screws on the hinges.
-
-
-
Separate the screen from the rest of the laptop.
-
-
-
Using a pair of tweezers, remove the two stickers on the bottom of the screen.
-
Unscrew the two screws underneath.
-
-
-
Stick the plastic opening tool underneath the screen bezel and run it along the edge of the screen.
-
-
-
Unscrew the four inner screws around the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S1-G5, Nance Spring 2017 crwdns2935289:0USF Tampa, Team S1-G5, Nance Spring 2017crwdne2935289:0
USFT-NANCE-S17S1G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:018crwdne2935297:0
