crwdns2915892:0crwdne2915892:0
In this guide, you will learn how to replace the RAM in your computer, using a screwdriver and a plastic opening tool.
crwdns2942213:0crwdne2942213:0
-
-
Click button 1 to the unlocked position.
-
-
-
Push and hold button 2 to the left.
-
As you push button 2 to the left position, simultaneously lift up the battery pack.
-
-
-
Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.
-
-
-
-
Remove the one 2.5mm Phillips #1 middle plate screw.
-
-
-
Lift up the middle vent panel.
-
Set the panel to the side.
-
-
-
Using the plastic opening tool, remove the outer panel and set to the side.
-
-
-
Using your fingers, unclip the two side clips.
-
-
-
The RAM should now be at a 30 degree angle.
-
Using your fingers, unclip the top two clips.
-
The RAM should just pop out. You can remove it with your fingers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of Alabama, Team S3-G11, Bedsole Spring 2018 crwdns2935289:0University of Alabama, Team S3-G11, Bedsole Spring 2018crwdne2935289:0
UA-BEDSOLE-S18S3G11
crwdns2931471:03crwdne2931471:0
crwdns2935297:018crwdne2935297:0
