crwdns2915892:0crwdne2915892:0
This guide provides step by step instructions of how to replace a faulty keyboard.
crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop over so the bottom is facing up.
-
Slide each of the three tabs on the bottom half of the assembly into the unlocked position.
-
-
-
Gently lift the battery out of the computer.
-
-
-
Remove the single 3mm Phillips #00 screw that secures the wireless card cover.
-
-
-
Remove the WIFI module cover. It will pull right off.
-
-
-
-
Unplug the white and black wires from the WiFi module.
-
-
-
Remove the twelve 8mm button head Phillips #00 B8 screws.
-
Remove the two 14 mm button head Phillips #00 B14 screws.
-
Remove the two 10 mm Phillips #00 battery compartment screws.
-
Remove the two 8 mm Phillips #00 screws.
-
-
-
Remove the seven 4mm flat Phillips #00 screws.
-
Remove the seven 20mm button head Phillips #00 screws.
-
-
-
Use the plastic opening tool to pry the two halves apart.
-
-
-
Using a screw driver for assistance, pop open the plastic cover and snap it off of the hinges. Repeat on the opposite side.
-
-
-
Remove the two 3mm Phillips #00 screws.
-
-
-
Slide keyboard out and away from the upper assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.