crwdns2915892:0crwdne2915892:0
Prerequisite only! This guide shows how to remove and replace the control valve bracket on the Toro Log Splitter 22618HD 2019 / LS-922.
crwdns2942213:0crwdne2942213:0
-
-
Grab the plastic housing at the end of the spark plug wire and pull firmly to disconnect it.
-
-
-
Flip the red engine ON/OFF switch to the OFF position.
-
-
-
-
Flip the fuel valve lever to the OFF position.
-
-
-
Use a 3/8 inch socket to remove the three bolts securing the control valve to the control valve bracket.
-
-
-
Use a 9/16 inch socket to remove the two bolts securing the control valve bracket to the frame.
-
-
-
Remove the control valve bracket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.