crwdns2915892:0crwdne2915892:0
Use this guide when you need to replace the battery because it has died.
crwdns2942213:0crwdne2942213:0
-
-
Remove the four Torx T5 screws from the back panel.
-
-
-
Wedge a spudger in between the front and back panel.
-
Apply leverage downwards to the spudger in order to remove the back panel.
-
-
-
-
Slide the battery out from under the brown wire-tape.
-
Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.
-
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0