crwdns2942213:0crwdne2942213:0
-
-
With the tablet turned off, remove the two 5mm Phillips head screws from the top of the tablet.
-
-
-
Use a 1 cm wide plastic opening tool to remove the back panel. Go around the entire back panel to ensure safe removal.
-
The power, return, and volume buttons are not firmly secured to the panel; it is likely they will fall off in the process of removing the panel.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using tweezers, carefully remove the cloth covering from the ribbon connector for the camera.
-
-
-
Use the tip of the spudger or your fingernail to flip up the small flap on the ZIF connector.
-
Carefully remove the ribbon cable from the connector.
-
-
-
Remove the camera from its position at the top of the tablet.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.