crwdns2915892:0crwdne2915892:0
This is a guide to replace your devices surflink port. This is a simple and short guide that doesn't require many tools. You may need to replace the surflink ort if it is unresponsive, but don't worry as this guide will only take a short amount of time.
crwdns2942213:0crwdne2942213:0
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the rubber cosmetic strip along the outside edge of the back plate with tweezers.
-
-
-
Remove the two rubber feet on the lower case with an opening tool.
-
-
-
Remove the two screws with a T3 Torx screwdriver.
-
-
-
Remove the seven screws securing the lower case with a T3 Torx screwdriver.
-
-
-
-
Lift the lower case gently and set it above the device.
-
-
-
Disconnect the battery cable by lifting the pull tab until it "clicks."
-
-
-
Remove the left I/O bracket by unscrewing the the three M1109237 screws with your T3 Torx Screwdriver.
-
-
-
Remove the two M1149393 screws that secure the ribbon cable with your T3 Torx screwdriver.
-
-
-
Lightly disconnect the flat-top connector by lifting it straight up with an opening tool.
-
-
-
Remove the two M1149393 screws that secure the Surflink port with your T3 Torx screwdriver.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Lift the surflink port out and up with your tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Western Carolina University, Team 1-3, Virtue Spring 2023 crwdns2935289:0Western Carolina University, Team 1-3, Virtue Spring 2023crwdne2935289:0
WCU-VIRTUE-S23S1G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:013crwdne2935297:0
crwdns2947410:01crwdne2947410:0
Dont even bother reading this unless you already have aquired the surflink port. They are basically impossible to get the parts through ifixit and microsoft. in europe at least.
