crwdns2915892:0crwdne2915892:0
You will be removing the back of the keyboard in order to replace broken LED lights. This is to ensure the keys from lighting up as this is one of the key attraction of the SteelSeries keyboard.
crwdns2942213:0crwdne2942213:0
-
-
Unplug the keyboard from the computer.
-
-
-
Unscrew the twenty black 4.5 mm Phillips #1 screws on the back of the keyboard.
-
-
-
-
Unscrew the two silver 4.0 mm Phillips #1 screws and the three black 6.5 mm Phillips #1 screws holding the silicone sheets.
-
-
-
Flip the chip slightly in order to remove the sheets.
-
-
-
Unscrew the two silver 4.5 mm Phillips #1 screws and the seven 5.0 mm Phillips #1 screws that deter the plastic panel from removal.
-
-
-
Remove the plastic panel and the white sheet.
-
-
-
Unplug the wires connected to the LEDs.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.