crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the blade on a Stanley 10-079 Box Cutter.
crwdns2942213:0crwdne2942213:0
-
-
Here is the knife we will be replacing the blade on, its a Stanley 10-079 Box Cutter.
-
-
-
Using a screwdriver or a coin remove the single screw in the center of the box cutter
-
-
-
Carefully pull up on the top half of the cutter exposing the blade on the inside.
-
-
-
-
carefully without cutting yourself lift the old blade out this should require no force.
-
-
-
with the old blade out replace it with a new blade from the back or one that was purchased separately.
-
-
-
With the fresh blade in place carefully place the upper half of the box cutter on the lower half that contains the blade as shown in image number 2.
-
-
-
insert the screw you first removed back into the hole in the center ensuring that you tighten it down not too tight to get undone without a power tool
-
-
-
With the center screw re-installed you are all set to use your Stanley 10-079 box cutter again with a brand new blade.
-
You are all set and ready to use your brand new installed blade! Here are some replacement blades that I found on amazon. https://www.amazon.com/Stanley-11-921L-5...
You are all set and ready to use your brand new installed blade! Here are some replacement blades that I found on amazon. https://www.amazon.com/Stanley-11-921L-5...
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Mikes computer and mobile device repairs crwdns2935289:0Mikes computer and mobile device repairscrwdne2935289:0
Business
crwdns2934841:01crwdne2934841:0
crwdns2935303:01crwdne2935303:0
