crwdns2915892:0crwdne2915892:0
This guide will require the use of a Phillips head screwdriver. The ribbon connector is usually the reason the device will need this replacement.
crwdns2942213:0crwdne2942213:0
-
-
Use an opening tool to push in and release sixteen small plastic clips around the edge of the case. As the clips are released, gradually pry the case apart.
-
-
-
-
Remove the single screw attaching the camera to the device.
-
-
-
Use the opening tool or a fingernail to release the ZIF connector.
-
Disconnect the camera ribbon cable.
-
Remove the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.