crwdns2915892:0crwdne2915892:0
If your phone's speaker is not working properly and needs replacement, follow the steps provided in this guide to guide you through the replacement process.
crwdns2942213:0crwdne2942213:0
-
-
Set the phone screen down on a clean flat, surface.
-
Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.
-
Open the back of the device by prying around the sides of the back panel using the plastic opening tool.
-
-
-
Insert the plastic opening tool in between the battery and the phone body.
-
Pry up on the side of battery, and remove it.
-
-
-
Insert the plastic opening tool in between the white plastic cover, and the body of the phone.
-
Pop the plastic cover off. To do this, gently push forward on the plastic opening tool while it is in between the cover and the phone.
-
-
-
-
Remove the six size 0 Phillips screws.
-
-
-
Insert the plastic opening tool in between the body of the phone and the thin plastic back cover.
-
Lift the black back cover off of the body with the plastic tool.
-
-
-
Locate the earphone jack on the top left of the black plastic back cover.
-
Use the tweezers to pinch the earphone jack and remove it from the back cover.
-
-
-
Using the tweezers, remove the loudspeaker module by firmly grasping it on one side, then slowly and carefully pulling the module in an upward direction.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 7-2, Leahy Fall 2014 crwdns2935289:0USF Tampa, Team 7-2, Leahy Fall 2014crwdne2935289:0
USFT-LEAHY-F14S7G2
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
