crwdns2915892:0crwdne2915892:0
If your phone's camera is not working properly and need replacement, follow these steps to guide you through the replacement process.
crwdns2942213:0crwdne2942213:0
-
-
Set the phone screen down on a clean flat, surface.
-
Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.
-
Open the back of the device by prying around the sides of the back panel using the plastic opening tool.
-
-
-
Insert the plastic opening tool in between the battery and the phone body.
-
Pry up on the side of battery, and remove it.
-
-
-
Remove the bottom cover of the phone using the plastic opening tool.
-
-
-
-
Remove the five 5.47mm and one 5.18mm Torx head screws using a Phillips #0 screwdriver.
-
-
-
Carefully remove the back cover using the plastic opening tool.
-
-
-
Pry up on the right side of the motherboard using the plastic opening tool.
-
-
-
Carefully detach the flex cable using a pair of tweezers.
-
-
-
Use the tweezers to detach the flex cable to remove the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 7-2, Leahy Fall 2014 crwdns2935289:0USF Tampa, Team 7-2, Leahy Fall 2014crwdne2935289:0
USFT-LEAHY-F14S7G2
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
