crwdns2915892:0crwdne2915892:0
If your phone's motherboard needs to be replaced, this guide will assist you through the replacement steps.
crwdns2942213:0crwdne2942213:0
-
-
Set the phone screen down on a clean flat, surface.
-
Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.
-
Open the back of the device by prying around the sides of the back panel using the plastic opening tool.
-
-
-
Insert the plastic opening tool in between the battery and the phone body.
-
Pry up on the side of battery, and remove it.
-
-
-
Remove the bottom cover of the phone using the plastic opening tool.
-
-
-
-
Remove the five 5.47mm and one 5.18mm Torx head screws using a Phillips #0 screwdriver.
-
-
-
Carefully remove the back cover using the plastic opening tool.
-
-
-
Pry up on the right side of the motherboard using the plastic opening tool.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Carefully detach the flex cable using a pair of tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0