crwdns2915892:0crwdne2915892:0
This guide can be used to replace the headphone jack.
crwdns2942213:0crwdne2942213:0
-
-
Using the spudger, pry open the back cover by starting alongside the edge of the back cover.
-
-
-
Once the part of the back cover has been opened up. Slide the spudger to pry completely detach the cover from the phone.
-
-
-
-
Using the Phillips #00 Precision screwdriver, take out 8 silver screws (3.15mm) and 5 gold screws (3.9mm) for a total of all the screws attached to the flat plate. 3 of the gold screws are located at the top of the phone and the other 2 screws are located at the bottom of the phone.
-
-
-
To remove the internal cover, use the plastic spudger tool and pry the cover from the phone as shown in the picture.
-
-
-
Using tweezer, locate the audio jack as shown and pull out the chip connected to the motherboard.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Carefully remove the audio jack by using the tweezers and pull firmly straight out of the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0