crwdns2915892:0crwdne2915892:0
Use this guide to replace the display on your Sony XPERIA Tablet Z.
This guide will take you through the process of removing the display and connection points to the motherboard.
This will require heating the screen to remove the adhesive be very careful as too much heat can damage the tablet its self.
crwdns2942213:0crwdne2942213:0
-
-
Remove the back cover by lifting up one corner using the plastic opening tool, and then removing the adhesive around the cover.
-
-
-
Gently separate the gold ribbon cable from the back side by lifting up with plastic opening tool and separating from the adhesive.
-
Separate the black ribbon cable from the back of screen by lifting up with a plastic opening tool.
-
-
-
-
Use a hairdryer, heat gun, or something suitable to heat the edge of the screen to soften the adhesive holding the screen.
-
-
-
Gently pry the edge of the screen working around while heating.
-
-
-
Clean adhesive from perimeter of frame to prepare for new screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:08crwdne2935229:0
crwdns2915084:0crwdne2915084:0
IUPUI, Team S5-G1, Harley Summer 2017 crwdns2935289:0IUPUI, Team S5-G1, Harley Summer 2017crwdne2935289:0
IUPUI-HARLEY-SU17S5G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:03crwdne2935297:0
crwdns2944067:05crwdne2944067:0
اريدشراءاريدشراءشاشه جديده
Do you need adhesive to attach new screen, & if so, what do you use?
i would also like to know what adhesive you use to reatach the screen. thanks
Wooo its self explanatory.Good work
Where do I get the Screen if I'm in South Africa
