crwdns2915892:0crwdne2915892:0
Follow this guide to replace a cracked or broken screen on you Sony Walkman NWZ-E438.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.
-
-
-
Use a small prying tool to carefully pry open the back of the device.
-
-
-
Pull up the 2 copper strips connecting the outside of the device to the inside of the device.
-
-
-
-
Using the small, plastic prying tool wedge it between the bottom of the frame and the outer frame.
-
Slowly circle the device, popping the outside of the frame off.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
To remove the screen, use the fine point tweezers and lift up on the metal piece at the bottom of the frame.
-
-
-
To remove screen from metal backing, use fine point tweezers to go in between the screen and metal backing and slowly pull them apart.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.