crwdns2942213:0crwdne2942213:0
-
-
Turn the laptop over so its underside is facing upwards and visible.
-
-
-
Once you flip the laptop over, make sure the right tab is pushed upwards to unlock it.
-
Use your left hand to push up the left tab to release the battery.
-
-
-
After the battery is released, locate the small gap where the battery and the shell meet. Then lift the gap up and rotate the battery up and away from yourself.
-
-
-
Use a Phillips #00 screwdriver to remove the two screws that secure the hard drive cover.
-
-
-
-
After the screw have been removed, pop the hard drive cover open.
-
-
-
Use a Phillips #00 screwdriver to remove the 3 screws that secure the hard drive.
-
-
-
When finished removing the screws, use your fingers to hold the blue ribbon attached from the hard drive to remove it from laptop
-
-
-
Remove the eleven 3mm flathead screws that surround the back panel.
-
Remove the back cover.
-
-
-
On the left speaker, unplug the cable that is in the way so you can remove the left speaker safely.
-
-
-
Remove the single screw at the bottom of the speaker
-
-
-
Remove the 2 black scews that at the top of the speaker.
-
-
-
Carefully remove the speaker. Keep watch no wiring is in the way.
-
Do this to both sides to remove the second speaker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
CSU Los Angeles, Team 6-3, Adachi Fall 2022 crwdns2935289:0CSU Los Angeles, Team 6-3, Adachi Fall 2022crwdne2935289:0
CSULA-ADACHI-F22S6G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:012crwdne2935297:0
