crwdns2915892:0crwdne2915892:0
The speakers allow the laptop to play sounds such as music. This guide shows the steps to remove the speakers for repair or replacement.
crwdns2942213:0crwdne2942213:0
-
-
Turn the laptop over so its underside is facing upwards and visible.
-
-
-
Standing so that the barcode and warning labels are upright and legible, push the left tab up and away from yourself.
-
-
-
Standing so that the barcode and warning labels are upright and legible, push the right tab up and away from yourself.
-
-
-
Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.
-
-
-
Flip laptop over so the bottom is facing upwards.
-
-
-
Remove 2 bottom screws in the top right on the HDD cover, with a size P000 screwdriver.
-
-
-
-
Remove the screws on the HDD with a Phillips #000 screwdriver.
-
-
-
Pull plastic tab away from the laptop.
-
Lift HDD away from laptop.
-
-
-
Remove 4 hinge screws with a Phillips #0 screwdriver.
-
-
-
Pop open hinge.
-
Remove black screw size P000.
-
-
-
Remove two hinge screws size P00.
-
Pop open hinge.
-
-
-
Follow wire down its wire channel and remove it from the channel.
-
Pull up on the connector to disconnect the speakers to the motherboard.
-
-
-
Remove speaker and wire from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0