crwdns2915892:0crwdne2915892:0
Released November 13, 2011, this is the only model ever released. It can be disassembled with screwdrivers and a small amount of prying. Model # CECH-ZED1U
crwdns2942213:0crwdne2942213:0
-
-
Remove the base by pushing in the button and sliding out the unit.
-
-
-
Remove USB port cover from back plate with a metal spudger.
-
-
-
With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
-
With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
-
-
-
-
Remove back plate with a plastic opening tool by slowing prying around the entire plate.
-
Once separated the plate easily lifts off.
-
-
-
With the Phillips #01 screwdriver, remove the four 5 mm length x 7 mm head screws from the assembly (two for each side speaker).
-
-
-
Remove the plastic plate covering the speaker.
-
Lift the speaker out of its holding tray.
-
-
-
Remove the speaker by depressing the white tab on the speaker wire connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Speakers in this page are out of stock, do you think these will work? https://www.amazon.com/Speaker-Speakers-...