crwdns2915892:0crwdne2915892:0
This repair may be needed if your device functions properly, but the indicator lights do not work.
crwdns2942213:0crwdne2942213:0
-
-
Remove the base by pushing in the button and sliding out the unit.
-
-
-
Remove USB port cover from back plate with a metal spudger.
-
-
-
-
With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
-
With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
-
-
-
Remove back plate with a plastic opening tool by slowing prying around the entire plate.
-
Once separated the plate easily lifts off.
-
-
-
With the Phillips #02 screwdriver, remove the two 5mm length x 5mm head screws located on the left and right side of the light bar board.
-
-
-
Remove the light bar by depressing the tab on the white data connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0