crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Begin by holding the camera upside down with the bottom facing you. Identify the housing for the SD card, and battery. 
- 
                     
            You will use your other hand to slide the lock switch to this housing to the right. This will release the cap, allow it to come upwards. 
 
- 
                     
            
- 
   
   - 
                     
            Now that the cap to the battery and SD card housing is open, the SD card is visible. 
- 
                     
            You will need to press down on the SD card until you hear a click. Release the SD card and it will now be available to remove. 
- 
                     
            Grip the SD card and pull it out of the SD card slot. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            To reinsert the SD card place it in its housing. 
- 
                     
            You will then need to push down on the SD card until you hear a click. 
 
- 
                     
            
- 
   
   - 
                     
            You may now close the housing for the SD card and battery. 
- 
                     
            Close the cap and while holding it down slide the locking tab to the left. This step should lock the cap in place. 
 
- 
                     
            
