crwdns2915892:0crwdne2915892:0
The E-mount is a lens mount that joins the camera’s body and the lens. Replacing a damaged or non-functioning E-mount requires removing the lens and the casing of the mount.
crwdns2942213:0crwdne2942213:0
-
-
Hold the camera with one hand and the lens in another.
-
With the hand holding the camera, simultaneously push down on the lens release button while twisting the lens counterclockwise then pull to remove the lens.
-
-
-
Using a PH0 Philip’s screwdriver, unscrew and remove the four 1.2mm Philip’s screws on the front of the E-mount.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using your fingers, pull out and remove the top silver plate exposing a black spacer ring underneath.
-
Repeat the previous step for the black spacer plate exposing the second silver spacer ring.
-
Using your fingers or tweezers, pull out the second silver spacer ring.
-
-
-
Using a PH0 Philip’s screwdriver, unscrew and remove the two 1.2mm Philip's screws located on opposite sides of the lens mount.
-
Using your fingers, pull off the lens housing.
-
-
-
Using tweazers, remove the lens release button.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S13-G2, Cagle Spring 2017 crwdns2935289:0USF Tampa, Team S13-G2, Cagle Spring 2017crwdne2935289:0
USFT-CAGLE-S17S13G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:012crwdne2935297:0
