crwdns2915892:0crwdne2915892:0
If your Sony ICF-C1T alarm clock/radio is having issues with changing the station or playing the correct frequency, you may need to replace the tuner dial. Replacing the tuner dial on your radio will ensure that the alarm clock/radio can switch through different radio frequencies. Follow this guide for step-by-step instructions on replacing the tuner dial of your device.
crwdns2942213:0crwdne2942213:0
-
-
Using the Phillips #00 screwdriver, remove four 14mm screws from the underside of the device.
-
-
-
Use the opening tool to pry apart the edges of the top and side portions of the device.
-
-
-
-
Separate the device by gently pulling up on the top portion.
-
-
-
To remove the motherboard, gently pull apart the sides of the device.
-
-
-
Remove the tuner dial by pulling it off of the motherboard. This can take a little force to remove.
Ive always wondered how tuner knobs magically disappear! Its instructional posts like this that tell you to remove it.... and nothing more, as if the plastic knob being gone will somehow fix it....
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
Thanks, this was not fun but the guide helped.