crwdns2915892:0crwdne2915892:0
Removing and replacing the lens is a very simple and easy task.
crwdns2942213:0crwdne2942213:0
- 
   
   
- 
                     
            
Rotate your camera such that the underside is facing you and the lens is facing the ground.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Using your left thumb, push down the slider to the left of the SD card slot.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Using your right index finger and thumb, pull the battery toward you and then away from the camera.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Orient the camera with the battery side facing up.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Remove the single 4.5 mm Phillips #00 screw.
 - 
                     
            
Remove the single 5.5 mm Phillips #00 screw.
 
 - 
                     
            
 - 
   
   
- 
                     
            
With the blue plastic opening tools, gently pry the plastic casing surrounding the start/stop button free.
 - 
                     
            
Remove the casing using your right thumb and index finger.
 
 - 
                     
            
 - 
                     
                                                
 - 
   
   
- 
                     
            
Flip open the LCD panel to get to the side panel.
 - 
                     
            
Remove the three 5.5 mm Phillips #00 screws.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Turn the camera around to the grip side and remove the 5.5 mm Phillips Head screw using your J00 Phillips Head screwdriver.
 
 - 
                     
            
 - 
   
   
- 
                     
            
With the bottom of the camera facing up, remove the two 5.5mm Phillips #00 screws.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Orient the camera so the bottom is facing you.
 - 
                     
            
Use the blue plastic opening tools to gently ease the camera shell off of the camera.
 - 
                     
            
Rotate the camera so the LCD side panel is facing you and gently pry the shell off from the camera.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Orient the camera such that the lens is facing to your left.
 - 
                     
            
Using your right hand to hold the camera, gently remove the lens panel from the camera with your left hand.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Rotate the camera so that it is upright and the lens is pointed to your left.
 - 
                     
            
Using your right hand to hold the screwdriver and your left to hold the camera, remove the single 5.5 mm Phillips #00 screw from on the top of the shutter assembly.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Rotate the camera such that the lens is pointed downward and the LCD screen points to your right.
 - 
                     
            
Remove the two Phillips #00 screws from the LCD screen's hinge.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Orient the camera such that it is upright and the lens is facing to your right.
 - 
                     
            
Using your left hand to hold the camera, gently remove the shutter assembly from the hull with your right hand.
 
 - 
                     
            
 - 
   
   crwdns2935267:0crwdne2935267:0Tweezers$4.99
- 
                     
            
Orient the camera such that the bottom is facing toward you and the lens is facing to your right.
 - 
                     
            
Using your metal tweezers, gently remove the wire harness connecting the shutter assembly to the motherboard.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Rotate the camera so that it is upright and the lens is facing to your right.
 - 
                     
            
Remove the ribbon cable connecting the shutter assembly to the motherboard using your metal tweezers.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Remove the three 5.5mm Phillips #00 screws holding the lens in.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Gently pull the lens up from the camera.
 
 - 
                     
            
 
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
Know where I can buy a replacement lense? Or have advice? Turned it one one day and it automatically gets stuck zoomed in and makes noises in the lense like it’s faulty