crwdns2915892:0crwdne2915892:0
Removing the camera shell is an easy task that can be done in a couple of minutes.
crwdns2942213:0crwdne2942213:0
-
-
Rotate your camera such that the underside is facing you and the lens is facing the ground.
-
-
-
Using your left thumb, push down the slider to the left of the SD card slot.
-
-
-
Using your right index finger and thumb, pull the battery toward you and then away from the camera.
-
-
-
Orient the camera with the battery side facing up.
-
-
-
-
Remove the single 4.5 mm Phillips #00 screw.
-
Remove the single 5.5 mm Phillips #00 screw.
-
-
-
With the blue plastic opening tools, gently pry the plastic casing surrounding the start/stop button free.
-
Remove the casing using your right thumb and index finger.
-
-
-
Flip open the LCD panel to get to the side panel.
-
Remove the three 5.5 mm Phillips #00 screws.
-
-
-
Turn the camera around to the grip side and remove the 5.5 mm Phillips Head screw using your J00 Phillips Head screwdriver.
-
-
-
With the bottom of the camera facing up, remove the two 5.5mm Phillips #00 screws.
-
-
-
Orient the camera so the bottom is facing you.
-
Use the blue plastic opening tools to gently ease the camera shell off of the camera.
-
Rotate the camera so the LCD side panel is facing you and gently pry the shell off from the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0