crwdns2915892:0crwdne2915892:0
The CX260V has a very complicated process in having to take apart all of the external panels in order to access the internal speaker and other internal items.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #00 screwdriver to remove the one 3mm and two 5mm screws located in the battery assembly area.
-
-
-
Remove the two 5mm screws located on the top left and bottom of the camera.
-
Remove the 3mm screw located in the middle of the joint attaching the LCD screen to the device.
-
-
-
Remove the two 5mm screws from the panel to the right of the LCD screen.
-
-
-
Use the plastic opening tool to remove the cover for the recording buttons.
-
-
-
Remove the five 5mm screws located on the bottom panel.
-
Remove the bottom panel covering the internal motherboard.
-
-
-
Remove the 5mm screw located by the lens and two 5mm screws located under the handle.
-
Remove the leather strap from the device.
-
-
-
Remove the 5mm screw to the left of the Record button.
-
Remove the entire right-side panel where the leather strap was located.
-
-
-
-
Use a spudger to remove the LCD joint cover.
-
-
-
Remove the three black 5mm screws and one silver 4mm screw located on the front right-side of the camera, near the orange motherboard.
-
-
-
Remove the 5mm screw located on the top left near the camera lens.
-
-
-
Using tweezers, carefully detach the two wires connected to the bottom motherboard portion of the camera.
-
Remove the lens panel.
-
-
-
Remove the three 5mm screws.
-
Carefully remove the camera lens with your hands or a spudger.
-
-
-
Remove one 5mm screw located on the back left section near the zoom and picture control capturing button.
-
There are two flat blue wires keeping the buttons connected to the main assembly. Carefully set them aside or unplug them.
-
-
-
Remove one silver 5mm screw located near the tripod mount.
-
Remove the tripod mount screw that has the mount assembly underneath.
-
-
-
Remove the silver 5mm screw located on the front right side of the camera by the orange motherboard.
-
Unplug the wire.
-
Remove the silver 5mm screw underneath the wire.
-
-
-
Using tweezers, release the clip attaching the main internal system to the mainframe. This allows the rest of the camera to be freely taken apart.
-
-
-
Using the screwdriver remove the two black 5mm screws located on the side of the speaker.
-
-
-
Gently remove the red and black wire connected to the mother board with the tweasers.
-
Remove the tri color wires from the mother board. (Has a white connection)
-
Unplug the orange flat wire located at the bottom of the camera.
-
Removes the Internal Speaker
-
-
-
Using a screwdriver remove 5mm silver screw located in the inner back by the battery component holding down a chip.
-
Removes the Microphone Jack
-
Using the tweezers, remove internal speaker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Eastern Washington University, Team 1-5, Plummer Spring 2015 crwdns2935289:0Eastern Washington University, Team 1-5, Plummer Spring 2015crwdne2935289:0
EWU-PLUMMER-S15S1G5
crwdns2931471:04crwdne2931471:0
crwdns2935297:012crwdne2935297:0
