crwdns2915892:0crwdne2915892:0
In order to keep your device in working order, the tape transport unit may need to be replaced.
crwdns2942213:0crwdne2942213:0
-
-
Remove the eight Phillips #00 screws. There are six screws on the bottom of the camera and two screws beneath the back light button.
-
-
-
Remove the five Phillips #00 cassette side screws.
-
-
-
Remove the three Phillips #00 screws located on the top of the lens side cover.
-
-
-
Remove the Phillips #00 screw holding the microphone on.
-
-
-
-
Remove the two Phillips #00 screws from lens side cover.
-
-
-
Slide the lens side cover away from camera.
-
-
-
Remove the Phillips #00 screw from the tape transport slider.
-
-
-
Remove the four Phillips #00 screws located on the top of the camera.
-
-
-
Remove the electrical connector from camera.
-
-
-
The tape transport unit is now free from the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0