crwdns2915892:0crwdne2915892:0
This is a comprehensive guide on how to fix and replace the LCD screen for Sony HDR-AS30V.
crwdns2942213:0crwdne2942213:0
-
-
Power off the device. Remove the component jack cover.
-
Open component door.
-
Using the Phillips 00 screwdriver, remove the two screws holding the jack cover in place.
-
-
-
Open the battery door.
-
Slide the battery cap along the length of the camera, then flip the cap outward. Use caution; there may be internal damage affecting the functionality of the sliding mechanism.
-
-
-
Prepare to remove outer casing.
-
Using the 2.5 mm precision slotted screwdriver, insert the tip of the screwdriver under the holder to wedge. Use caution when preparing to wedge apart fragile components.
-
-
-
Separate Casing from Device.
-
With the screwdriver wedged, apply slight force while pulling the casing away from the device. Use caution to avoid causing damage to fragile parts.
-
-
-
-
With the outer casing pulled away from the device, take note of the orientation of the inner component to avoid an electrical short.
-
Once the orientation of the inner component is noted, slide the inner component out of the casing. You may now replace the broken casing with a new one.
-
-
-
Remove two screws with the PH000 screwdriver.
-
Pop off plastic holder.
-
-
-
With the flathead screwdriver, wedge under area shown and pop upwards.
-
-
-
Flip open screen and make sure no cables are in the way.
-
-
-
With the flathead, lift up cable lock and pull the film out from underneath the lock.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Penn State, Team 2-12, Kaschak Winter 2015 crwdns2935289:0Penn State, Team 2-12, Kaschak Winter 2015crwdne2935289:0
PSU-KASCHAK-W15S2G12
crwdns2931471:04crwdne2931471:0
crwdns2935297:04crwdne2935297:0
